Industrial OCM
Industrial bridge: hydraulics, gearboxes, turbines, transformers and water/particle control.
Profile utilities
Viscosity Retention
Compares used- and fresh-oil viscosity to screen shear loss, thickening or dilution.
Run →Used oil analysisTAN Growth
Shows acidity growth relative to fresh oil or baseline.
Run →DegradationOxidation and Nitration
FTIR degradation screen using user-supplied baseline and limits.
Run →ContaminationWater Contamination
Interprets measured water content against configured limits.
Run →WearWear Metals Rate
Normalizes a selected wear-metal concentration per 100 operating hours.
Run →WearWear Metals Pattern
Builds a combined Fe/Cu/Al/Pb/Cr/Sn index and supports dominant-metal review.
Run →Data qualitySample Quality Screen
Screens delivery delay, sampling temperature, flush volume and contextual completeness.
Run →Data qualityLaboratory Comparison
Calculates relative difference between two laboratories; methods and the sample must be comparable.
Run →Data qualityVOA/UOA Delta
Compares one fresh- and used-oil property and reports relative change.
Run →Driveline fluidsDifferential Oil Health
Screens viscosity, wear metals, water and oxidation in the in-service fluid.
Run →Coolant & fuelFuel Storage Contamination
Screens water, sediment and microbial risk in stored fuel.
Run →Commercial fleetHydraulic Fluid Cleanliness
Checks entered ISO 4406 codes against user-supplied target codes.
Run →Commercial fleetMaintenance Action Priority
Combines result severity, asset criticality, change rate and redundancy.
Run →Industrial OCMISO 4406 Cleanliness Code
Checks the three cleanliness codes against the target profile for the component.
Run →Industrial OCMKarl Fischer Water Screen
Checks water against limits configured for the lubricant and asset.
Run →Industrial OCMGearbox Health Index
Combined Fe, PQ, viscosity, water and TAN screen for gearboxes.
Run →Industrial OCMTransformer Oil DGA Screen
Calculates TDCG and flags acetylene, hydrogen, ethylene and CO/CO₂ for expert classification.
Run →Industrial OCMTurbine Oil Health
Screens TAN, RPVOT retention, RULER, MPC and water for turbine-oil systems.
Run →Industrial OCMViscosity Index Retention
Compares in-service viscosity index with the baseline and flags material loss.
Run →Industrial OCMEngine Oil Glycol Contamination
Screens coolant ingress using measured glycol content.
Run →Industrial OCMNLGI Consistency Screen
Assesses measured grease penetration deviation from the target.
Run →Industrial OCMHydraulic Cleanliness Trend
Compares the three ISO 4406 codes with the previous sample and flags worsening cleanliness.
Run →Industrial OCMTurbine Oil Demulsibility
Checks oil/water separation time against configured limits.
Run →Industrial OCMTransformer Oil PCB Screen
Compares measured PCB concentration with applicable regulatory or contractual limits.
Run →Industrial OCMCompressor Oil Gas Reactivity
Tracks change in acid number or another accepted indicator after exposure to process gas.
Run →Industrial OCMExtended Worked Penetration Change
Assesses grease mechanical stability using penetration change after extended working.
Run →Industrial OCMTurbine Oil Air Release
Checks entrained-air release time against configured limits.
Run →Industrial OCMMembrane Patch Colorimetry
Screens varnish potential using measured MPC/ΔE and configured limits.
Run →Industrial OCMOil Dielectric Constant Deviation
Compares current value with baseline and flags abnormal composition change or contamination.
Run →Industrial OCMRULER Antioxidant Retention
Calculates antioxidant reserve relative to fresh oil.
Run →Industrial OCMRPVOT Retention
Compares in-service and fresh-oil RPVOT for trend assessment of oxidation stability.
Run →Industrial OCMCopper Strip Corrosion
Checks the numeric corrosion class against the accepted product limit.
Run →Industrial OCMGrease Water Washout
Compares grease mass loss in water washout with configured limits.
Run →Industrial OCMCentrifuge Sediment Screen
Checks measured sediment volume as an indicator of contamination and insoluble products.
Run →Industrial OCMTransformer Oil Interfacial Tension
Checks IFT against limits configured for transformer oil type and age.
Run →Industrial OCMFerrography Severity Screen
Combines large and small ferromagnetic particle indicators into a transparent triage index.
Run →Industrial OCMGrease Dropping Point
Compares measured dropping point with the minimum product or application limit.
Run →Industrial OCMFour-Ball Wear Scar
Checks wear-scar diameter against the fresh lubricant specification.
Run →Industrial OCMCompressor Oil Carbon Residue
Checks carbon residue as an indicator of deposit tendency in compressor service.
Run →Industrial OCMOil Insolubles Screen
Checks pentane or toluene insolubles against the method and asset profile.
Run →Industrial OCMTransformer Oil Furan Screen
Checks 2-FAL or an agreed total indicator as a marker of cellulose insulation ageing.
Run →Industrial OCMOil Foaming Characteristics
Checks foam volume and collapse time for the selected test sequence.
Run →Data qualitySample Standing-time Risk
Checks time between shutdown/mixing and sample collection.
Run →WearPQ / Iron Discordance
Compares a ferrous-debris/PQ indication with spectrometric Fe.
Run →Industrial OCMRPVOT / RULER Consistency
Combines remaining oxidation stability and antioxidant reserve for turbine-oil trending.
Run →Driveline fluidsGear-oil Oxidation / Viscosity Screen
Combines oxidation and viscosity deviation from the gear-oil baseline.
Run →Industrial OCMHydraulic Viscosity Deviation
Compares in-service hydraulic-fluid viscosity against the fresh-fluid baseline.
Run →Industrial OCMHydraulic Water Saturation
Evaluates relative water saturation using thresholds configured for the fluid and temperature.
Run →Industrial OCMTransformer TDCG Generation Rate
Calculates TDCG increase in ppm/day between two consecutive DGA samples.
Run →Industrial OCMTransformer Acetylene Generation Rate
Calculates C₂H₂ change rate between consecutive DGA samples for trend monitoring.
Run →